clear storm-control counters Created by Sinan KizarLast updated 27 Mar , 2019 To clear storm control counters, use the clear storm-control counters command in Privileged EXEC mode. Syntax clear storm-control counters [broadcast | multicast | unicast] [interface interface-id] Parameters broadcast—(Optional) Clear Broadcast storm control counters. multicast—(Optional) Clear Multicast storm control […]
Layer 2 Technologies – Link Aggregation Control Protocol (LACP)
lacp port-priority To set the physical port priority, use the lacp port-priority Interface (Ethernet) Configuration mode command. To restore the default configuration, use the no form of this command. Syntax lacp port-priority value no lacp port-priority Parameters value—Specifies the port priority. (Range: 1–65535) Default Configuration The default port priority is […]
Layer 2 Technologies – Port Channel
channel-group To associate a port with a port-channel, use the channel-group Interface (Ethernet) Configuration mode command. To remove a port from a port-channel, use the no form of this command. Syntax channel-group port-channel mode {on | auto} no channel-group Parameters port-channel—Specifies the port channel number for the current port to […]
Layer 2 Technologies – GARP VLAN Registration Protocol (GVRP)
clear gvrp statistics To clear GVRP statistical information for all interfaces or for a specific interface, use the clear gvrp statistics Privileged EXEC mode command. Syntax clear gvrp statistics [interface-id] Parameters Interface-id—(Optional) Specifies an interface ID. The interface ID can be one of the following types: Ethernet port or Port-channel. […]
IP Routing – IPv6 Prefix List
clear ipv6 prefix-list Use the clear ipv6 prefix-list command in privileged EXEC mode to reset the hit count of the IPv6 prefix list entries. Syntax clear ipv6 prefix-list [prefix-list-name [ipv6-prefix/prefix-length]] Parameters prefix-list-name—The name of the prefix list from which the hit count is to be cleared. ipv6-prefix—The IPv6 network from […]
IP Routing – IPv6
clear ipv6 neighbors Use the clear ipv6 neighbors command in privileged EXEC mode to delete all entries in the IPv6 neighbor discovery cache, except static entries. Syntax clear ipv6 neighbors Parameters N/A Command Mode Privileged EXEC mode User Guidelines Example The following example deletes all entries, except static entries, in […]
IP Routing – VRRP
clear vrrp counters To clear the VRRP counters, use the clear vrrp counters command in Privileged EXEC mode. Syntax clear vrrp counters [interface-id] Parameters interface-id—(Optional) Interface Identifier. Default Configuration No description. Command Mode Privileged EXEC mode User Guidelines Use this command without the identifier-id argument to clear the VRRP counters […]
IP Routing – Open Shortest Path First (OSPF)
area authentication To enable area default authentication for an Open Shortest Path First (OSPF) area, use the area authentication command in router configuration mode. To remove a default authentication specification of an area from the configuration, use the no form of this command. Syntax area area-id authentication [message-digest] no area […]
IP Routing – RIP
clear rip statistics The clear rip statistics Privileged EXEC mode command clears statistics counters of all interfaces and all peers. Syntax clear rip statistics Parameters N/A Command Mode Privileged EXEC mode Example The following example shows how to clear all counters: switchxxxxxx# clear rip statistics default-information originate To generate a […]
IP Routing – IP Addressing
ip address Use the ip address Interface Configuration (Ethernet, VLAN, Port-channel) mode command to define an IP address for an interface. Use the no form of this command to remove an IP address definition. Syntax OOB port: ip address ip-address {mask | /prefix-length} [default-gateway-ip-address] no ip address In-Band interfaces: ip […]