Layer 2 Technologies – Address Table

bridge multicast filtering To enable the filtering of Multicast addresses, use the bridge multicast filtering Global Configuration mode command. To disable Multicast address filtering, use the no form of this command. Syntax bridge multicast filtering no bridge multicast filtering Parameters This command has no arguments or keywords. Default Configuration Multicast […]

Layer 2 Technologies – Loopback Detection

loopback-detection enable (Global) To enable the Loopback Detection (LBD) feature globally, use the loopback-detection enable Global Configuration mode command. To disable the Loopback Detection feature, use the no form of this command. Syntax loopback-detection enable no loopback-detection enable Parameters This command has no arguments or keywords. Default Configuration Loopback Detection […]

Multicast – IPv6 PIM

clear ipv6 pim counters To reset the Protocol Independent Multicast (PIM) traffic counters, use the clear ipv6 pim counters command in privileged EXEC mode. Syntax clear ipv6 pim counters Parameters N/A. Command Mode Privileged EXEC mode User Guidelines Using the clear ipv6 pim counters command will reset all PIM traffic […]

Multicast – IPv4 PIM

clear ip pim counters To reset the Protocol Independent Multicast (PIM) traffic counters, use the clear ip pim counters command in privileged EXEC mode. Syntax clear ip pim counters Parameters N/A Command Mode Privileged EXEC mode User Guidelines Using the clear ip pim counters command will reset all PIM traffic […]

Multicast – MLD Snooping

ipv6 mld snooping (Global) To enable IPv6 Multicast Listener Discovery (MLD) snooping, use the ipv6 mld snooping command in Global Configuration mode. To return to the default, use the no form of this command. Syntax ipv6 mld snooping no ipv6 mld snooping Parameters N/A Default Configuration IPv6 MLD snooping is […]

Multicast – MLD Proxy

ipv6 mld-proxy To add downstream interfaces to a MLD proxy tree, use the ip mld-proxy command in Interface Configuration mode. To remove downstream from interfaces to a MLD proxy tree, use the no form of this command. Syntax ipv6 mld-proxy upstream-interface-id no ipv6 mld-proxy Parameters upstream-interface-id—Upstream Interface identifier. Default Configuration […]

Multicast – MLD

clear ipv6 mld counters Created by Sinan KizarLast updated 28 Mar , 2019 To clear the Multicast Listener Discovery (MLD) interface counters, use the clear ipv6 mld counters command in Privileged EXEC mode. Syntax clear ipv6 mld counters [interface-id] Parameters interface-id—(Optional) Interface Identifier. Command Mode Privileged EXEC mode User Guidelines […]

Multicast – IPv4 IPM Router

ip multicast-routing To enable IPv4 Multicast routing on all IP-enabled interfaces of the router and to enable Multicast forwarding, use the ip multicast-routing command in global configuration mode. To stop Multicast routing and forwarding, use the no form of this command. Syntax ip multicast-routing [pim | igmp-proxy] no ip multicast-routing […]