clear cpu counters To clear traffic counters to and from the CPU, use the clear cpu counters EXEC mode command. Syntax clear cpu counters Parameters This command has no arguments or keywords. Default Usage None Command Mode User EXEC mode Example The following example clears the CPU traffic counters. switchxxxxxx> […]
Management – SSH Client
ip ssh-client authentication To define the SSH client authentication method used by the local SSH clients to be authenticated by remote SSH servers, use the ip ssh-client authentication command in Global Configuration mode. To return to default, use the no format of the command. Syntax ip ssh-client authentication {password | […]
Management – Telnet, Secure Shell (SSH) and Secure Login (Slogin)
RSA and Certificate Commands Keys and Certificates The device automatically generates default RSA/DSA keys and certificates at following times: When the device is booted with an empty configuration. When user-defined keys/certificates are deleted. Some commands in this section are used to generate user-defined RSA/DSA keys and certificates that replace the […]
Management – IP System
ping Use the ping EXEC mode command to send ICMP echo request packets to another node on the network. Syntax ping [ip] {ipv4-address | hostname} [size packet_size] [count packet_count] [timeout time_out] [source source-address] ping ipv6 {ipv6-address | hostname} [size packet_size] [count packet_count] [timeout time_out] [source source-address] Parameters ip—Use IPv4 to check the network connectivity. ipv6—Use IPv6 to check the […]
Management – File System Commands
File Specification The files may be located on: Network: TFTP servers and/or SCP servers – Network files FLASH – Flash files mass-storage connected to a USB port – USB files. Only one mass-storage is supported. Uniform Resource Locators (URLs) are used to specify the location of a file or a […]